The CYCYL series smoke and oil removal filter element is an industrial grade purification element designed for oily smoke conditions. It relies on the coalescence and separation principle of gradient composite filter materials to efficiently capture micron sized oil mist particles, smoke impurities, and liquid oil droplets. Built in stainless steel support frame prevents deformation, the end cover is tightly sealed without leakage, supports multi precision gear selection, and is suitable for scenarios such as air compressor oil removal, industrial oil fume purification, and painting workshop oil mist collection. It has low operating resistance and can effectively reduce the oil pollution load of backend equipment.
The CYCYL series smoke and oil removal filter element is an industrial grade purification element designed specifically for mixed working conditions of oily smoke and oil mist. Based on the principle of multi-stage coalescence and separation, it can efficiently capture micron sized oil mist particles, smoke impurities, and liquid oil droplets. As the core processing component of the oil fume purification system, it greatly reduces the oil pollution load of the back-end purification unit, avoids rapid failure of subsequent equipment due to oil accumulation, and provides stable gas-liquid separation pretreatment and deep purification support for various industrial and commercial scenarios that produce oil fume and oil mist.
| Brand Name | DFFILTRI |
| Model | CYCYL |
| Efficiency | G4 |
| Initial Resistance | ≤65Pa |
The CYCYL series smoke and oil removal filter element adopts a gradient composite filter material structure. The front layer intercepts large oil droplets and smoke particles, and the middle layer condenses tiny oil mist into sedimentable large droplets through coalescing fibers. The rear fine filter layer further captures residual small particles; Equipped with a stainless steel support frame inside and outside to prevent deformation of the filter material under high pressure conditions, the end cover adopts sealant or metal welding technology to achieve leak free sealing. The overall system can operate stably for a long time under normal working conditions below 80 ℃. It can be divided into multiple levels according to processing accuracy and is suitable for different purification needs from rough pre-treatment to deep oil removal. It supports various universal installation structures such as flat press and snap in, and can directly adapt to most purification equipment of the same specifications.
The CYCYL series smoke and oil removal filter element is widely used for industrial oil fume purification generated in processes such as mechanical processing, welding, heat treatment, quenching, etc. It can also be used for compressed air oil removal in air compressor systems, oil mist collection in industrial painting workshops, and pre-treatment of kitchen oil fume in catering. At the same time, it is suitable for exhaust gas purification in oil and gas recovery devices, exhaust gas oil and mist removal in the printing industry, and various front-end pre-treatment processes that generate oily aerosols, providing reliable core filtration support for oil fume purification systems in different scenarios.
The aggregation and separation efficiency of the CYCYL series smoke and oil removal filter element gradient composite filter material is stable, which can effectively reduce the residual oil content in the flue gas and reduce the speed of oil pollution adhesion in subsequent purification units; The built-in stainless steel support frame structure has high strength and is not prone to filter material deformation and oil mist penetration problems under high wind speed and high oil mist concentration conditions; The overall airflow path design is reasonable, ensuring oil removal efficiency while controlling operating resistance, without significantly affecting the system's exhaust or supply air volume; The universal installation interface has strong adaptability and can be replaced without changing the original device structure, greatly reducing the cost of scene adaptation and upgrade.
The resistance of the CYCYL series smoke and oil removal filter element increases rapidly after operation, often due to the concentration of oil fumes at the front end exceeding the design load, and a large amount of oil dirt quickly blocking the pores of the filter material. A primary oil baffle can be installed at the front end to pre separate large oil droplets and extend the service life of the filter element; After purification, there is still obvious oil mist residue at the exhaust port. Check whether the installation direction of the filter element is reversed and whether there are gaps at the end cover seal. Adjust the installation direction and reinforce the sealing structure to restore normal effect; Local oil leakage and dripping on the surface of the filter element are mostly caused by the failure to discharge the accumulated oil inside in a timely manner. It is recommended to regularly open the drain valve at the bottom of the equipment to prevent the accumulation and overflow of liquid droplets; After cleaning, the oil removal effect significantly decreased, indicating that the cohesive fiber structure inside the filter material has been damaged. Simply replacing the new filter element can restore the original purification performance.
EN
